Binder 9020-0402, Перевод оригинального руководства по эксплуатации

Страница: 16 / 173

MK LIT (E5) 01/2021 page 16/172
Secure the gas cylinders against falling and other mechanical damage.
WARNING
Risk of injury through sudden release of the stored pressure energy when the valve
safety is torn off.
Injuries.

Secure gas cylinders against falling (chaining).

Transport gas cylinders with a cylinder cart.
The valve of the gas cylinder always must be closed before screwing on or unscrewing the gas hose.
WARNING
Risk of injury through sudden release of the stored pressure energy when opening
the cylinder valve of a not connected cylinder.
Injuries.

Close the gas cylinder valve before connecting or removing the gas hose.
After connecting the gas cylinder, check all gas connections for leaks (e.g. with leak spray or
diluted soap solution).
2. Intended use
Following the instructions in this operating manual and conducting regular maintenance
work (chap. 27) are part of the intended use.
Any use of the chambers that does not comply with the requirements specified in this Operating
Manual shall be considered improper use.
Other applications than those described in this chapter are not approved.
Observe the relevant regulations for handling lithium accumulators, CO
2
and inert gases (e.g. DGUV Infor-
mation 205-026 for Germany).
2.1 Use
Battery test chambers LIT MK are suitable for temperature treatment of solid or pulverized charging mate-
rial, as well as bulk material, using the supply of heat or cold and as a test cabinet for lithium-ion energy
storage.
The chambers can be used for drying processes, but they are particularly suitable for all tasks that occur in
materials testing and aging tests. The chambers are suitable for harmless materials.
Do NOT use the chamber for drying purpose, especially if greater quantities of steam leading to conden-
sation will be set free.
Ageing tests and performance tests of lithium-ion accumulators (secondary cells) may be carried out. Ex-
posure of non-energized and alternately energized and non-energized accumulators at different tempera-
tures and, if necessary, humidity values is permitted for testing the service life and determining perfor-
mance.