Binder 9020-0402, Перевод оригинального руководства по эксплуатации

Страница: 156 / 173

MK LIT (E5) 01/2021 page 156/172
Chamber size 240 720
Weight
Weight (empty) Kg /
lbs.
375 /
827
584 /
1287
Temperature data
Temperature range °C /
°F
-40 to +110
-40 to 230
-40 to +110
-40 to 230
Temperature fluctuation ± K 0.1 to 0.5 0.1 to 0.5
Temperature uniformity (variation) ± K 0.1 to 1.2 0.3 to 2.0
Average heating up time acc. to IEC 60068-3-5 K/min. 5.0 4.0
Average cooling down time acc. to IEC 60068-3-5 K/min. 3.5 3.4
Heating up time from -40 °C to 110 °C minutes 40 96
Cooling down time from 110 °C to -40 °C minutes 160 100
Max. heat compensation at 25 °C /
77°F
W 2000 3500
Electrical data (model version MK056-230V)
IP-system of protection of the battery test chamber
acc. to EN 60529
IP 23 23
IP-system of protection of the safety module acc. to EN
60529
IP 20 20
Nominal voltage (+/-10%) at 50 Hz power frequency V 400 400
Current type 3N~ 3N~
Nominal power kW 5.60 8.70
Power plug
CEE plug 5
poles, 16 Amp
CEE plug 5
poles, 16 Amp
Over-voltage category acc. to IEC 61010-1 II II
Pollution degree acc. to IEC 61010-1 2 2
Over-current release category B, internal A 3x 16 3x 16
Electrical data of the voltage and frequency changer
IP-system of protection acc. to EN 60529 IP 23 23
Nominal voltage (+/-10%)
at 60 Hz power frequency (input side)
V 480 480
Current type 3N~ 3N~
Nominal power kW 9 13
Over-voltage category acc. to IEC 61010-1 II II
Pollution degree acc. to IEC 61010-1 2 2
Fuse A 16 16
Environment-specific data
Noise level (mean value) dB(A) 62 65
Noise level (mean value) with voltage and frequency
changer
dB(A) 67 67
Energy consumption at +20 °C /
68 °F
Wh/h 1300 1900
Filling weight of refrigerant R 452A (GWP 2140) kg / lbs. 1.40 / 3.09 3.20 / 7.10
* Used to calculate the LEL
Note: Chambers with voltage and frequency changer: Average heating up time reduced by 0.3 K/min each.
All technical data is specified for unloaded chambers with standard equipment at an ambient temperature
of +22 °C +/- 3 °C /
71.6 °F +/- 5.4 °F
and a power supply voltage fluctuation of +/-10%. Technical data is
determined in accordance to BINDER Factory Standard Part 2:2015 and DIN 12880:2007.
All indications are average values, typical for chambers produced in series. We reserve the right to
change technical specifications at any time.