HELP
112
Binatone Helpline: 0845 345 9677 in UK
30 HELP
My iHome Phone does not turn on.
• Make sure the power adapter is securely connected
• Make sure you are using the power adapter that was included with your iHome Phone.
• Make sure the iHome Phone is turned on.
My iHome Phone does not recognize the memory card.
• Make sure you have inserted a certified memory card.
• Make sure you have inserted the memory card correctly.
See page 20 on how to insert a memory card.
My iHome Phone shows a low-battery warning
The iHome Phone is low on power and needs to be charged before you can use it.
See page 20 on how to charge your iHome Phone.
I cannot send or receive emails or access the web
Check the wireless signal indicator in the status bar at the top of the screen. If there is no
signal, you are not connected.
I cannot make or receive calls
Your iHome Phone may not be registered to a DECT base station.
Check if the telephone cord and power adaptor are connected properly.
The display freezes or does not respond
Turn the iHome Phone off and turn it on again.
is not scrolling when the handset is placed on the base
• Incomplete battery contact - adjust the handset on the DECT base station.
• Dirty contact - clean the battery contact by wiping with an alcohol moistened cloth.
• Battery is full - charging is not necessary at this time.
There is no sound coming from the iHome Phone
• Unplug and reconnect the headset. Make sure that the connector is pushed in all the
way.
• The volume may be deactivated or set too low.
Ihomephone_IFU_EN.book Page 112 Thursday, June 9, 2011 2:21 PM