ADVANCE FEATURES
110
Binatone Helpline: 0845 345 9677 in UK
29 ADVANCE FEATURES
Advance Features is for users who do more than using the iHome Phone for Telephony
and Internet surfing. It allows the user to perform advance operations.
WARNING
This Advance Features is not for trial and error or testing out the menu; some settings
may cause your iHome Phone to malfunction when set improperly.
29.1 Firmware Upgrade
You may need to upgrade the firmware of your iHome Phone from time to time to improve
its performance and enable other future features.
You can obtain new firmware releases from Binatone website
www.binatonetelecom.com
when it is available. Contact the helpline 0845 345 9677 for assistance.
Firmware Upgrade can only be done via a memory card. Internet Firmware Upgrade may
be possible in the future.
Get the firmware (files) from Binatone and save these files into a memory card - make
sure that the files are not corrupted or infected with software virus. You need to insert the
memory card into the iHome Phone.
1
Make sure that your iHome Phone has been sufficiently charged. If not, please put the
iHome Phone into the DECT base station to charge.
2
Press
M
and tap
Settings
>
Firmware Upgrade
.
3
Tap
Yes
to proceed.
The firmware is now upgrading your iHome Phone software.
4
This procedure may take up to 3~5 minutes.
Note
Do not remove the battery of your iHome Phone while performing the Firmware Upgrade.
5
After Firmware upgrade, the phone will power down automatically.
6
Press and hold
O
to power up the phone again.
29.2 Factory data reset
This erases all data from the phone's memory, and sets it back to original factory settings.
Make sure you have backed up any important application-specific data to the SD card. It
does not erase data stored in the SD card.
1
Press
M
and tap
Settings
>
Privacy
>
Factory data reset
.
Ihomephone_IFU_EN.book Page 110 Thursday, June 9, 2011 2:21 PM