Internet Function
62
Binatone Helpline: 0845 345 9677 in UK
Your iHome Phone will start to establish a link to the network. Once it is established,
will appear on the status bar of your home screen.
8
You can now use the Internet function.
Note
The connection speed is dependent on the capability of the Wi-Fi network.
Once you have joined a Wi-Fi network manually, the iHome Phone will automatically
connect to it whenever the network is in range. If more than one previously used network
is in range, the iHome Phone will join the one last used.
Note
If you encounter problems connecting to the Wi-Fi network using preconfigured settings,
try to tap on the network and select
Forget
to forget the “Remembered” network, then
perform setup again.
13.2 Set Number of Wi-Fi Network Channels
Different regions utilize different channel schemes for their Wi-Fi networks. For example,
North America uses 11 channels, ETSI uses 13 channels while Japan uses 14 channels.
It is recommended that you set up your iHome Phone according to your country’s network
scheme to achieve optimum connection.
1
Press
M
.
2
Select
Settings
>
Wireless & networks
.
3
Select
Wi-Fi settings
.
4
Press
M
.
5
Tap
Advanced
>
Regulatory domain
.
6
Select from
11 channels
,
13 channels
or
14 channels
.
13.3 Select Wi-Fi Sleep Policy
1
Press
M
.
2
Select
Settings
>
Wireless & networks
.
3
Select
Wi-Fi settings
.
4
Press
M
.
5
Select
Advanced
>
Wi-Fi sleep policy
.
6
Select
When screen turns off
,
Never when plugged in
or
Never
.
Ihomephone_IFU_EN.book Page 62 Thursday, June 9, 2011 2:21 PM