Billion M500, Руководство пользователя

Страница: 51 / 181

47
Internet

4G/LTE
Status: Choose Activated to enable the 3G/4G-LTE connection.
Usage Allowance: to control 4G/LTE flow, click it to further configure about 4G/LTE flow control, refer
to the following Usage Allowance for more information.
IP Pass-Through Mode:
When “enabled”, the device will gain a WAN IP via 4G/LTE dial-up and pass
on to the PC connected to device, thus your PC gets a public WAN IP working on the internet. Note:
under this circumstance, often only one PC is connected to the device.
Network Mode: There are some options of service standards:
“Automatic”, “UMTS 3G only”, “GSM
2G Only”, “UMTS 3G Preferred”, “GSM 2G Preferred”, “GSM and UMTS Only”, “LTE Only”, “GSM,
UMTS, LTE”. If you are not sure which mode to use, you may select
Automatic to auto detect the best
mode for you.
TEL No.: The dial string to make a GPRS / 3G/4G-LTE user internetworking call. It may provide by
your mobile service provider.
Dual APN: The Router can support up to two APNs. Select Single or Dual.
APN: An APN is similar to a URL on the WWW, it is what the unit makes a GPRS / UMTS call. The
service provider is able to attach anything to an APN to create a data connection, requirements for
APNs varies between different service providers. Most service providers have an internet portal which
they use to connect to a DHCP Server, thus giving you access to the internet i.e. some 3G operators
use the APN ‘internet’ for their portal. The default value is “internet”.
PDN Type: Select the supported IP version, IPv4, Both IPv4/IPv6 or IPv6 only.
Authentication Protocol: Check if the ISP wants authentication, select PAP or ChAP.