114
PPTP Client
PPTP client can help you dial the PPTP server to establish PPTP tunnel over Internet. A total of 4 sessions can
be created for PPTP client.
Rule Index:
The Index to mark the session.
Connection Name:
User-defined name for the PPTP connection.
Active
: Select
Yes
to activate the account. PPTP server is waiting for the client to connect to this
account.
Authentication Type:
The authentication type, Pap or Chap, and MPPE 128bit Encryption. When
using PAP, the password is sent unencrypted, whilst CHAP encrypts the password
before sending,
and also allows for challenges at different periods to ensure that an intruder has
not replaced the client.
When passed the authentication with MS-CHAPv2, the MPPE encryption is supported.
Encryption Ley Length:
Encryption Mode:
CPC:
Username
: Please input the username for this account.
Password
: Please input the password for this account.
Connection Type
: Select Remote Access for single user, Select LAN to LAN for remote gateway.
Server IP Address:
Enter the WAN IP address of the PPTP server.
Remote Network IP Address
: Please input the subnet IP for remote network.
Remote Network Netmask
: Please input the Netmask for remote network.
Click
Save
button to save your changes.
Содержание M500
