Billion BiPAC 6900AX(L)-2400, Руководство пользователя

Страница: 99 / 276

94
Advanced
– 2.4GHz Wireless
Band:
In the 2.4 GHz radio frequency.
Channel:
Choose a channel to use. Here is a list of available channels or select Auto mode instead.
Scan Used Channel:
Press the button to scan and list all channels being used.
Auto Channel Timer (min):
Available when Auto Channel is selected. The auto channel times
length it takes to scan in minutes.
802.11n/EWC:
Select to auto enable or disable 802.11n.
Bandwidth:
The higher the bandwidth the better the performance will be but greater interference
with other wireless devices. Select
20MHz or 20/40MHz
for lessen radio interference.
Control Sideband:
Only available for 20/40MHz. It allows you to select upper sideband or lower
sideband. Sideband refers to the frequency band either above (
upper sideband
) or below (
lower
sideband
) the carrier frequency, within which fall the spectral components produced by modulation
of a carrier wave.
802.11n Rate:
This allows you to select the fixed transmission rate or auto.
802.11n Protection:
Turn off for maximize throughput.
Support 802.11n Client Only:
Turn on the option to only provide wireless access to the clients
operating at 802.11n speeds.
OBSS Co-Existence:
Coexistence between 20 MHZ and 40 MHZ overlapping basic service sets
(OBSS) in wireless local area networks.
Turbo QAM:
Enable or disable Turbo QAM technology, only can be enabled when both peers are
equipped with the feature.
RTS Threshold:
Request to Send (RTS) threshold specifies the packet size, when exceeds the size,
the RTS/CTS will be triggered. The default setting of 2347(max length) will disable the RTS.
DTIM Interval:
Delivery Traffic Indication Message (DTIM). The entry range is a value between 1
and 255. A DTIM is countdown variable that informs clients of the next window for listening to
broadcast and multicast messages. When the AP has buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with a DTIM interval value. AP clients hear the beacons
and awaken to receive the broadcast and multicast messages. The default is 1.