Bianchi brasilia FESTA, Руководство по эксплуатации и обслуживанию

Страница: 22 / 88

ENGLISH
22
6.1 PASSWORD
The current programming logic requires, when entering by pressing the
PROG key, the insertion of a password allowing to access one programming
menu. To facilitate and speed up some operations on the field, the password
management is subdivided as follows:
PWD 1 - Reduced programming menu (00001)
PWD 2 – Sales Menu (00000)
6.2 Vending machine MENUS
PWD 1 allows to enter the dispenser menu. The procedure to enter the
menu is as follows: Press the button PROGRAMMING, enter the password
and press ENTER.
The dispenser menu is listed below.
6.0 SOFTWARE INSTRUCTIONS
6.3 MAINTENANCE
Maintenance is performed by pressing the key ‘Service’.
In line 1 ”Maintenance xxx” will be displayed , where xxx displays the boiler
temperature, and in line 2 the possible detected alarms.
Pressing twice the key Service, the stand by heating phase will be bypassed,
allowing you to perform test selections even on non regimen temperatures.
Pressing a key the slave boiler temperature will be displayed in scroll.
Keep the service button pressed for 5 seconds to reset the “coffee ground
error” alarm (all machine versions).
Instructions
for User
Membrane keypad
P1 Increase value
P2 Decrease value
P3 Move cursor
P5 Enter
P7 Escape
In the maintenance mode the keys have the following meaning:
Mechanical keypad
P1 : Alarms scroll-down / 2nd level function
P2 : Alarm reset
P3 : Alarm history / Test run complete / 2nd level function
P4 : Only water test
P5 : Mixer test
P6 : Group movements / Decounter recharge (2nd level function)
P7 : View total selections / MDB tube filling (2nd level function)
P8 : Cleaning / MDB tube emptying (2nd level function)
Keypad Touch 7”:
WARNING: the menu may differ both in terms of controls and their position,
based on the kits installed in the machine.
Keypad
touch
In the programming mode the keys have the following meaning: