BIANCHI VENDING BVM952, Руководство по эксплуатации и обслуживанию

Страница: 32 / 71

32
4.8 FIRST SELF INSTALLATION MODE
At the fi rst machine start up will be performed a self installtion .The
aim of this procedure is to avoid the manual connections of wires on
the boards after the fi lling of the Hydraulic cyrcuit.
For Espresso single boiler:
When the distributor is started up the airbreak is fi lled with wa-
ter.
When the fl oater is in the upper position the machine will start
loading water automatically and this will go on until 200cc of water
are counted by the fan (then water will be supplied via a mixer
throughout the procedure).
The procedure will be carried out with resistance off.
At the end a date will be shown on the display.
For Espresso Double boiler
When the distributor is started up the airbreak is fi lled with wa-
ter.
When the fl oater is in the upper position the machine will start the
automatic installation process and following loading of both boilers
(then water will be supplied via a mixer and by the 3-way Coffee
EV throughout the procedure).
The procedure will be carried out with resistance off.
At the end a date will be shown on the display.
For Instant boiler :
When the distributor is started up the airbreak is fi lled with wa-
ter.
When the fl oater is in the upper position at least for 5 consecutive
seconds the machine will open an instant electrovalve and start a
water loading cycle in the boiler (then water will be supplied via a
mixer throughout the procedure)
The procedure will be carried out with resistance off.
At the end a date will be shown on the display.
Now we must enter the installation date using the push button
panel as shown below:
Pushing the ENTER BUTTON , the machine will wait for 10 seconds
then will start to warm up the boiler.
The date will be stored in a safe place of the board.
To restore the fi rst installation mode, go to Programming using
Password 22933.
ENTER DATE
INCREASE
VALUE
DECREASE
VALUE
MOVE
CURSOR
MOVE
BETWEEN
Day/Month/Year
KEY 1 INCREASE VALUE
KEY 3 MOVE CURSOR
KEY 5 ENTER DATE
KEY 7 DECREASE VALUE
KEY 9 MOVE BETWEEN Day/Month/Year
For Alphanumeric version
For Push Button Panel version