BIANCHI VENDING BVM952, Руководство по эксплуатации и обслуживанию

Страница: 51 / 71

51
In the management program Bianchi telemetry uses three tran-
smission systems:
SMS
GSM
GPRS
SMS
Sending the alarms generated by the machine to the central
unit,fi ling and returning to the selected number for a quick in-
tervention.
SMS Example:
950E*ECE*280205*1008
where the fi rst fi eld specifi es the type of machine,the second the
event and the third and fourth the date and time.
Moreover, it is possible to use the Win Modem program allowing to
manage the customer machine fl eet so to rationalize any technical
intervention.
If an e-mail message is not sent successfully, the manager will
receive an SMS notifi cation.
If the SMS messages are not sent successfully, 3 attempts will be
made, at intervals of 5 minutes, repeated every hour.
GSM
Via the VMC-Central Unit direct connection through the GSM
modems it is possible to download the distributor settings offl ine
and modify them. It is also possible to request the updated sale
data.
The Program for the remote management of the Audit data of
Bianchi distributors is managed as follows:
The graphic presentation of the form includes a list containing the
information about the type of distributor, telephone number of the
GSM installed on the board and the sale point of the distributor.
By pressing the Audit Read key it is possible to call the remote
machine.
After the connection is established, which is monitored via labels
on the form, the data download will start. At the end of this ope-
ration a CommonDialog will be displayed (Save File with name)
allowing to save the fi le in the “.prm” format, i.e. with an extension
comptabile with WinBianchi (e.g.: BVM970. prm).
Via the WinBianchi\ WinSoftwareAperto program in OFF-LINE
mode, it is possible to open this fi le later to monitor the data or
to modify them.
After modifying the fi le, it is possible to save it with another name
or to overwrite it. Now the fi le must be returned to the remote
machine using the Write all key to re-write the entire machine
confi guration or using the Write Select key to re-write only the
modifi ed data.
GPRS
The sending of e-mail messages with EVA audit data can be adju-
sted from PC on fi xed days and timetables. Moreover it is possible
to select when to reset the resettable data. It is possible to receive
e-mail messages also with the distributor error. The e.-mail mes-
sage with the EVA-TDS data is sent at the established time and
therefore the clock chip is required. At the end of this operation
the card will generate a Beep.
If any e-mail message is not sent successfully, 5 attempts will be
made at intervals of 5 minutes, repeated every 6 hours.
To use the GPRS section the SIM card must be confi gured by
enabling the password for the connection to the internet network
and setting the connection strings on the card; these operations
are to be made by the different providers and are at customer’s
charge.
All SMS-GSM-GPRS connection and transmission test are made
with TIM, the use of other providers will not ensure the correct
operation, in particular as far as GPRS section is concerned.
In the machine, in the “Remote connection” menu the following
data can be displayed:
Signal intensity In line 2 the display will show the GSM signal
intensity, the network registration status and
the presence of GPRS network.
The signal intensity can range from 0 to 31 and if the signal cannot
be found the value 99 will be displayed.
The value of the network registration status can range from 0 to
5 according to the meaning:
0 - network not found or absent;
1 - ok, registered in the network of its own provider;
2 – not registered, searching network;
3 - network found but registration not allowed;
4 – network status indetermined;
5 - registered in roaming with another provider.
If GPRS network is present a G will be displayed.
SIGNAL INTENSITY
19 1 G
➤
➤
➤
GSM Signal Intens.
Registration to the network
GPRS network
Via WinBianchi the following can be programmed:
APN Access Point Name - identifi es the node for
Internet access used by GPRS connection.
Provided by the chosen provider.
USER ID User identity for GPRS access. Provided by
the provider.Some providers do not use it
(for example: Tim uses the SIM telephone
number as user-id, whereas Wind does not
require it ; in this case write “none”).
PASSWORD Password for GPRS access. Viene fornito
dall’operatore. Provided by the provider. As
for the User ID, some providers do not use
it The max number of characters is 15 (for
example: Tim provides the password, whe-
reas Wind does not require it ; in this case
write “none”).
SERVER SMTP Address of the outgoing mail server. Provided
by the chosen provider.
EMAIL RECEIVER is the e-mail address to which the e-mail
messages with Audit data must be sent.