BH Thermal BriskONE, Руководство пользователя

Страница: 26 / 27

2 6
SECr Security level 4
Unit Temperature Units F
dPt Decimal point positioning 0
InPt Input fault timer 0.5
InPb Input alarm action Fail
SEnC Sensor rate of change OFF
SPL Lowest allowable value for setpoint. 32
o
F or 0
o
C
SPH Highest allowable value for setpoint. 999
AL Temperature Alarm setting Hi
ALt Temperature Alarm Type AbS
ALiH Alarm Inhibit Feature OFF
ALSt Alarm Output State OPEn
ALLP Alarm Lamp Setting OoFF
ALLb Alarm Loop Break OFF
Table 4: List of Menu Items Located in the Secondary Menu
Secondary Menu
Display Description Default Value
ALLo Value for low alarm (Only if AL is set
for Lo or HiLo.)
32
o
F or 0
o
C
ALHi Value for high alarm (Only if AL is set
for Hi or HiLo)
999
Out1 Determines the controlling output for
setpoint 1
1tP
tunE Controls the type of tuning the
controller will perform
Self
Prog Allows the Run/Hold button control the
Ramp/Soak
OFF
PSEt Enables the Ramp/Soak Programming OFF
StAt Determines what is displayed in the
Primary Menu
OFF
tbAS Time base for Ramp/Soak 60_S
##ti Time for the ## segment *
##SP Set Point for the ## segment *
##AL ## segment's alarm event *
PEnd Ramp/Soak's ending action OoFF
InPC Input correction value 0
LPbr Loop break protection 360
Table 5: List of Menu Items Located in the Primary Menu
Primary Menu