BH Thermal BriskONE, Руководство пользователя

Страница: 14 / 27

1 4
13 . Press the INDEX key until ALLb appears on the display. ALLb
is the alarm loop break menu item.
•
On The controller will alarm if no change has been
detect by the sensor under full output conditions for
a period of time.
•
OFF The controller will not alarm.
14 . Use the UP ARROW and DOWN ARROW keys to change the
value.
15 . Press ENTER to retain that value.
16 . The next two menu items are located in the Secondary Menu.
Their appearance depends on the values entered in the menu
items above. To return to the Primary Menu, wait 30 seconds,
or for a faster response, press the
UP ARROW and ENTER
keys followed by pressing the DOWN ARROW and INDEX
keys.
17 . Press the UP ARROW and ENTER keys simultaneously to
enter the Secondary Menu.
18 . Press the INDEX key until ALLo appears on the display. ALLo
is the low limit alarm and will only appear, if AL has a value of
Lo or HiLo .
19 . Use the UP ARROW and DOWN ARROW keys to change the
value.
20 . Press ENTER to retain that value.
21 . Press the INDEX key until ALHi appears on the display. ALHi
is the high limit alarm and will only appear, if AL has a value of
Hi or HiLo .
22 . Use the UP ARROW and DOWN ARROW keys to change the
value.
23 . Press ENTER to retain that value.
Sensor Break
Alarm Action
1. Hold the UP ARROW and ENTER simultaneously for five
seconds to enter the secure menu.
2. Press the INDEX key until InPt appears on the display. InPt is
the input fault timer. When the input is out of range, shorted, or
open, the timer will start.
OFF or a range from 0.1 to 540.0
minutes can be selected.