BH Thermal BriskONE, Руководство пользователя

Страница: 11 / 27

1 1
Setpoint Range
Menu items SPL and SPH limit the value that may be entered
for the setpoint.
1. Hold the UP ARROW and ENTER simultaneously for five
seconds to enter the secure menu.
2. Press the INDEX key until SPL is shown on the lower display.
SPL is the lowest allowable value that the set point may be
entered in as.
3. Use the UP ARROW and DOWN ARROW keys to change the
value.
4. Press ENTER to retain the value.
5. Press the INDEX key until SPH is shown on the lower display.
SPH is the highest allowable value that the set point may be
entered in as.
6. Use the UP ARROW and DOWN ARROW keys to change the
value.
7. Press ENTER to retain the value.
Note:
SPL and SPH only limit what value may be entered for the
setpoint. These values are not used in the actual control of the
heater.
Setpoint
1. `Press INDEX to the advance to SP1 .
2. Use the UP ARROW and DOWN ARROW keys to change the
value until the desired setpoint is displayed.
3. Press ENTER to retain that value.
Note: For entering the set point while in the Ramp/Soak mode,
see Ramp/Soak instructions on page 15.
Method of Control
1. Press the UP ARROW and ENTER keys simultaneously.