EN
48
USER MANUAL
Prolonged Storage
If you are going to store the bicycle for a prolonged period (1 month or more), remove the battery and store it as follows.
•
Make sure that the remaining battery capacity is above 50% and then store it indoors, in a cool
(10 to 20°C) and dry place.
•
Check the remaining battery capacity once a month, as the battery is slowly discharged while in
storage.If the capacity is below 50%, charge it until it is above 50%.
•
When using it again after a prolonged period of storage, be sure to charge the battery before use.
TECHNICAL SPECIFICATIONS
Motor
•
BH continuous current brushless motor.
•
250 W power (500 W in NITRO and AWD models).
•
Maximum assistance speed 25 km/h (45 km/h in NITRO models and 35 km/h in AWD models).
•
System voltage:
1.
EVO, AWD and NITRO models: 48 V.
2.
ATOM and EASYGO models: 36 V.
Battery
•
Lithium-ion battery.
•
Battery voltage:
1.
EVO, AWD and NITRO models: 48 V.
2.
ATOM and EASYGO models: 36 V.
•
Capacity:
1.
EASYGO model: 250 Wh.
2.
EVO, AWD, NITRO and ATOM models: 400 Wh, 500 Wh or 600 Wh (depending on
version).
Central Display Panel
•
USB type: USB 2.0.
•
Output current: max. 1,000 mA.
FAQ
What is this bicycle's maximum speed?
It depends on the user. There is no maximum speed. However, at speeds over 25 km/h, the pedal assistance
provided by the motor is disabled. This restriction on assistance is a legal requirement for pedal-assist bicycles,
according to European regulation EN 15194.
The NITRO and AWD models are an exception as they are not approved as pedal-assist bicycles. The maximum
assistance speed is limited to 45 km/h in NITRO models, which are approved as motorcycles. In the case of
AWD models, the maximum assistance speed is limited to 35 km/h and they are solely intended for off-road use.
