Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 69 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
SAFETY REGULATIONS
Page | 7-2
7.2 SAFETY EQUIPMENT
The machine is supplied with the following safety equipment:
—
mechanical safety equipment
—
electro-mechanical safety equipment
—
electrical safety equipment
7.2.1 Mechanical safety equipment
The following mechanical safety equipment are installed on the machine:
—
silent block shock absorbers
—
pawl style safety device on Universal Carriage
7.2.1.1 Silent block shock absorbers
The silent blocks, also called shock absorbing buffers are mounted on the bottom of the
Universal Carriage for when the system lands in the downward direction to the ground,
mounted on the Bottom Stop for when the systems lands in the downward direction onto the
Bottom Stop, and mounted on the Top Stop for when the system lands in the upward
direction at the Top Stop. The shock absorbing buffers have also been installed on the
Sliding Head for if the Top Stop was not installed to help protect the Sliding Head section
from impact with the Universal Carriage.
7.2.1.2 Pawl style safety device
The pawl style safety device is a safety device located on the Universal Carriage. The safety
device intervenes to stop and hold the load of the Universal Carriage in the event of breakage
of the wire rope cable. It is mandatory to identify and resolve the cause of the intervention of
the safety device before placing the machine back into service.
DANGER
All installations of the Maxial Track Hoist system require the Top Stop to be
installed at least one rung below the Sliding Head section.
DANGER
It is mandatory to identify and resolve the cause of the intervention of the pawl
style safety device before placing the Maxial Track Hoist back into service.