Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 31 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
MACHINE INFORMATION
Page | 3-8
Figure 3.10
Figure 3.11
3.3.1.7 Moveable Carriage Stops
3.3.1.7.1 Bottom Stop
The Bottom Stop is a movable carriage stop that rests on a rung below the Universal
Carriage to stop the downward travel of the Universal Carriage at a predetermined location
for loading and unloading a Carrier Basket. The Bottom Stop can be removed for
flexibility of system use. It is used to lock out the Universal Carriage during installation, lifting
the sliding head, and maintenance/repair to the Motor Pack.
3.3.1.7.2 Top Stop
The Top Stop is a movable stop that slides over a rung of the track and is held in place by a
locking pin. The Top Stop stops the upward travel of the Universal Carriage. It must always be
installed at least one rung below the Sliding Head. The Top Stop can be moved for flexibility of
system anywhere under the Sliding Head to also stop the carriage at a predetermined
location for loading or unloading a Carrier Basket.
DANGER
Bottom Stop should always be installed to stop the downward movement of the
Universal Carriage when performing maintenance or repair to the Motor Pack.
CAUTION
The Top Stop must ALWAYS be installed at least one rung below the Sliding
Head.