Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 18 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
INTRODUCTION
Page | 1-7
1.6 PREREQUISITES FOR THE ASSIGNED OPERATOR
The information contained in this instruction manual must be supported by sound judgement,
appropriate safety checks and caution in assessing every situation.
Since the operator has direct control of the machine, it is his/her responsibility to comply with
the safety requirments in question. The operator must make decisions on the use and
operation of the machine, bearing in mind that his/her personal safety and the safety of staff
members working on the same machine and in vicinity depends on his/her decisions.
1.6.1 Preparatory information
The operator must be aware of where this instruction manual can be found. The operator
must be confident in referring to the manual and consulting it whenever he/she is faced with
doubts or questions regarding the safe and proper use of the machine.
1.6.2 Operators training
The operator must be trained on the same model of machine or on a model that has
charcteristics of operation and control that corresponds with the machine that is to be used.
The operator must operate the machine in an area tha tis free from any obstruction, under the
direction of a quailifed person and for a period of time which is long enough to ensure that the
person being prepared is competent to use the machine. Only members of staff who have
been well-prepared and who are authorized must be allowed to use the machine.
Before being given authorization to use the machine, the operator must have:
—
been trained by a qualified person, and understands the purpose and function of each
control
—
read and understands the instructions for the proper use of the machine and the safety
regulations, or been trained on the contents of the instruction manual and the above
mentioned regulations by a qualified person
—
understands all of the warnings and instructions found on plates and tables on the
machine, after having read this instruction manual or by means of the explanations
given by a qualified person