Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 60 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
INSTALLATION
Page | 5-11
6. If you need more wire rope to get to a higher rung, repeat steps 3 through 5.
7. If you have extra wire rope cable after the Sliding Head is resting on the rung at
the desired height, keep a tight pull on the wire rope cable with a gloved hand,
press the UP button and reeve the excess wire rope cable onto the drum, never
letting your hand get closer than 1 ft (30.48 cm) to the Motor Pack.
8. Press the UP button on the Handheld Control Pendant to lift the Universal
Carriage off of the Bottom Stop. Remove the Bottom Stop. And lower the
Universal Carriage to the ground by pressing the DOWN button on the Handheld
Control Pendant.
9. Remove the Top Stop from the track and reinstall it one rung under the Sliding
Head section.
10. The Maxial Track Hoist is now ready to begin work at the desired height.
DANGER
Do not install the Sliding Head on any unsupported track sections.
DANGER
The final installation of the Sliding Head must at least be 20 feet away from the
Motor Pack.