Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 41 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
MACHINE INFORMATION
Page | 3-18
DANGER:
Safe operation of the machine is guaranteed only for the functions and material
listed in this instruction manual.
BETAMAX disclaims all responsibility if the machine is not used in accordance
with the purposes indicated and in conformity with the instructions stipulated in
this manual
3.5 INTENDED USE
The machine
’s specific applications:
—
Roofing
—
General building/construction
—
Scaffold erection and dismantling
—
Tiling
—
Plastering
—
Carpentry
—
Insulation installation
The machine is designed to provide the user with the following advantages:
— transport material and work equipment safely, efficiently and economically
— optimize and rationalize the work process in a modern construction site
— easy assembly and disassembly requiring only two people
— safety during operation, assembly, disassembly and when the structure may be
repositioned to other parts of the construction site
— conformity with all existing international regulations for this type of machine
3.6 NORMAL CONDITIONS OF STORAGE
Storage of the machine's various components does not require particular environmental
conditions. The only recommendation is to store the equipment in a place where water
infiltration is avoided as much as possible, as in the long run, this may affect the reliability of
the machine's electrical system. Do not cover the machine or its components with synthetic
fabrics or plastic in order to prevent condensation from forming. If the machine and its
components are stowed when wet, always ensure that the place where they are stowed is
adequately ventilated.
3.7
STORAGE CONDITIONS WITH TEMPERATURES REACHING A MINIMUM OF 14°F
If the machine is stored in a closed and heated place so as to protect it from the elements, no
particular precautions need to be taken, as long as the temperature is kept higher than 14°F.
After having stored the machine outdoors, with temperatures close to 14°F, it is necessary to
check for any structural damage caused by water infiltration and subsequent freezing.