Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 30 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
MACHINE INFORMATION
Page | 3-7
Figure 3.9
3.3.1.6 Sliding Head
The Sliding Head holds the pulley over which the wire rope travels and is designed to make it
easier to add or remove track pieces. It incorporates a 5-in. (12.7-cm) pulley on which the
wire rope coming from the Motor Pack goes up and over clockwise, traveling from the front of
the track and back down to the Universal Carriage. The Sliding Head slides on the track and
a bottom arm that is spring-loaded pivots out to clear the horizontal rung members.
DANGER
Sliding Head should never be mounted on the top rung of any ladder track.
DANGER
Do not install the Sliding Head above the highest Scaff-clamp.
DANGER
Do not install the Sliding Head on any unsupported track sections.
DANGER
The final installation of the Sliding Head must at least be 20 feet away from the
Motor Pack.