Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 16 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
INTRODUCTION
Page | 1-5
1.3 UPDATES OF THE MANUAL
This instruction manual reflects the conditions of the machine as at the time the machine was
marketed and sold; it cannot be considered inadequate solely because it has been
subsequently updated based on newly acquired knowledge. BETA MAX reserves the right to
upgrade its products and manuals, in line with its policy to continuously improve product
quality, with no obligation of upgrading previous productions and manuals, with exception of
particular cases.
The edition of an updated version of the use and maintenance instruction manual will not
oblige the manufacturer to update this manual, except in the instance of new regulations
being introduced, which narrow down the danger posed by the machine during its operation,
or upgraded features are installed. In these instances, BETA MAX undertakes to provide the
owner of the machine with a new version of the manual.
1.4 Definitions
The following definitions will be found in the descriptions within this manual:
—
USER
—
OPERATOR
—
MACHINE
— “USER” refers to the person who, due to his qualification, is appointed as site manager
where the machine is installed or the person who is directly responsible for the security
of the place where the same machine is installed
— “OPERATOR” refers to the person who, due to his qualification, is designated to install,
operate, use, carry out maintenance work, clean, repair or transport the machine
— “MACHINE” refers to the material hoist with a wire rope cable drive system mounted
onto a ladder track, with the brand name BETA MAX MAXIAL TRACK HOIST model, in
all its possible conformations and configurations. From this point forward in this
instruction manual, when reference is made to the Material Hoist MAXIAL TRACK
HOIST model, solely “MACHINE” will appear.
CAUTION
The operator assigned to work on the machine must be trained on how to use
the machine, the safety devices and the installed equipment and accessories
correctly. The operator must always wear the specific, individual protection gear
and clothing which is appropriate from a safety point of view and also adequate
for the type of work that is to be carried out (gloves, ear plugs, safety shoes,
safety belts, hard hat, goggles, etc.)