Beta Max MAXIAL TRACK HOIST, Инструкция по эксплуатации и обслуживанию

Страница: 54 / 160

Use and Maintenance Instruction Manual
MAXIAL TRACK HOIST
REV. 2.2 (2017)
INSTALLATION
Page | 5-5
Figure 5.6
7. Once the track is in the correct position and plumb, attach it to the horizontal
members of the scaffolding section using Scaff-clamps. Twist the T-bolt to pull
the track tightly against the scaffolding. There should be 2 Scaff-clamps
positioned no farther than 6 ft 6 in. (2.0 m) apart all the way up the track.
8. Using a s e c o n d 9 ft 9 in. (3.0 m) section of track, lay the track flat on the
ground. Insert the Sliding Head section so that the rung-lock mechanism is
positioned toward the bottom of the track and the pulley facing front.
9. Slide the Sliding Head section down from the top of the track section until it is
secured onto a rung in the middle of the track.
Figure 5.7
Figure 5.8