Best Barns Glenwood II, Сборочная книга

Страница: 10 / 24

3-1/2" x 24" OSB Filler
IMPORTANT: Do not
place heavy weight on loft
at this point.
96" Between OSB Fillers
Back
Wall
Side
Wall
1x3 Corner Trim
Step 10 Install Corner Trim
IMPORTANT: Lower Trim Must Be Installed Before Installing Roof Gables!
1. Locate (3) three 2" x 48-3/4" filler strips. Nail these on top of the siding on the back wall.
Use 6d galv. nails.
2. Install (2) two 99" long 1x3 white pine trim boards as corner trim to the back wall. Cut length
so trim is flush with top of OSB filler and bottom of siding. Install trim flush with the siding
on the side walls. Use 6d galv. nails spaced 12" apart to install all trim.
1x4 Trim Boards
3. Install (2) two 71-7/8" long 1x4 white
pine trim boards between corner
boards. Trim should be flush with
OSB sheathing. Cut 2nd board to fit.
4. Repeat to install trim boards to the
front wall panel.
Step 9B Install Loft Floor Sheathing continued
1. Locate (4) four 3-1/2" x 24" OSB fillers. Install at front and back corners on top of 2x4 tie
plates. Use 7d sinkers. Insure the space between fillers is 96".
2. Install loft flooring between OSB fillers. Edge of sheahting should be flush with front and back
wall tie plates. Refer to the suggested layout on previous page. Install flooring using 7d sinkers
spaced 12" apart.
Siding Filler
OSB Filler
Back
Wall
Side
Wall