Best Barns Glenwood II, Сборочная книга

Страница: 16 / 24

1. Locate (4) four 9-3/4" x 48" soffit panels. On the front gable nail first soffit with the 'LAP'
edge positioned 9-3/4" from the bottom end of the 2x4 to allow for the width of the soffit panels
on the side walls. Use 6d galv. nails.
Step 19 Install Soffit
2. Cut to fit next soffit to cover 2x4 at
the peak. Install (2) two soffit panels
on other side.
3. Locate (7) seven 9-3/4" x 48" soffit
panels. Measure from center of first
truss to edge of soffit on gable. Cut
a soffit panel to this length. Make
sure 'LAP' edge is the side cut off.
4. Nail the soffit panel to the end of
the 2x4s. See Detail 'C' below.
5. Install more soffit panels along the
side of the building cutting the last
soffit panel flush with the 2x4 on
the rear gable.
6. Repeat steps 3-5 to install soffit
panels on the front gable and the
opposite side wall.
Cut Soffit Panel to Meet
Center of Truss
1x4 Trim Board
Detail 'C'
Nail Soffit to End of 2x4
9-3/4"Soffit
Soffit
9-3/4" Wide Soffit