Berthold castxpert LB 452, Руководство по эксплуатации

Страница: 95 / 156

c
7 "Channel Overview" Menu
b
Rev. 04, 03/2015
95
Test
(Continued)
1. Click in the input field (Fig. 60, Pos. 3).

The numeric keypad opens (Fig. 18).
2. Enter a test count rate.
3. Confirm your entry by clicking on "Enter".

The test mode is started (Fig. 60, Pos. 1).
4. Click on <End test mode> to end the test.
Note
The current output switches to the fault current (see chapt. 7.3.1).
Note
The test count rate ends automatically after 5 minutes. If the test
count rate is to be activated again, the value must be entered in the
input field again.
7.2.2 Filter
In the "Channel Overview" menu , click on Settings | Filter (Fig. 54, Pos. 4).
Fig. 61 "Channel Overview" Menu, Settings - Filter