![Berthold castxpert LB 452 Скачать руководство пользователя страница 30](http://html.mh-extra.com/html/berthold/castxpert-lb-452/castxpert-lb-452_operating-manual_2739247030.webp)
c
4 Start-Up
30
Rev. 04, 03/2015
b
Configuring the Current Output on the Basic Module
(Continued)
5.
Set the desired position at the changeover switch (Sink Mode
(Fig. 12, Pos.1) or Position Source Mode (Fig. 12, Pos. 2).
1
Basic Module, changeover switch – Position Sink Mode
2
Basic Module, changeover switch – Position Source Mode (factory setting)
Fig. 12
Switching on the Basic Module Current Output at the Changeover
Switch
6.
Connect the module with the flat ribbon cable again.
7.
Push all the modules (Fig. 10, Pos. 3) of the measurement channel in again at
the same time.
8.
Fold the front panel up again.
9.
Tighten the screws again.
Note
Ensure that the position at the changeover switch on the basic mod-
ule and on the extension module is the same!
Use the same current output configuration on the basic and ex-
tension modules.
Содержание castxpert LB 452
