Berthold castxpert LB 452, Руководство по эксплуатации

Страница: 15 / 156

c
3 Product Description
b
Rev. 04, 03/2015
15
3
Product Description
3.1 Description of the System
The evaluation unit (EVU) consists of a system board (CU Control Unit) with an ex-
works pre-installed measurement module (channel 1).
The EVU can be distributed with up to 4 measurement modules (channels). This
makes the simultaneous monitoring of 4 mould levels possible.
There is also the possibility of ordering the EVU customised with a pre-installed
extension module or a fieldbus model or installing these modules yourself after-
wards. Further information on the extension module can be found in chapt. 4.3.2
and on the fieldbus module in chapt.Fehler! Verweisquelle konnte nicht gefun-
den werden..
You can connect the EVU to both radiometric detectors (GAMMAcast) and the elec-
tromagnetic measurement system (ECcast). When in doubt, the instructions refer
to the GAMMAcast instructions. For specific information regarding ECcast, refer to
the ECcast supplemental instructions.
3.2 Software
The field device is delivered with pre-installed software.
The revision status (version) of the software can be seen on the screen display when
starting up the EVU or in the "Channel Setting" menu.
In this manual, the software is described with effect from version 1.3.0 (CU - control
unit, system board) and 1.3.0 (MU - channel XY).
3.3 Power Supply
The EVU does not have an on and off switch with which the power supply can be
switched on or off. Ensure that the current of the EVU can be simply disconnected
via the external power supply.