Berthold castxpert LB 452, Руководство по эксплуатации

Страница: 57 / 156

c
6 The System Menu
b
Rev. 04, 03/2015
57
Graph
(Continued)
Note
In the "log interval" input field, set the interval in which the log data
is to be saved (Fig. 33, Pos. 2).
The smallest log interval which can be set is 0.5 s.
2. Click on the input field to set the log interval
(Fig. 33, Pos. 2).

The numeric keypad opens (Fig. 18).
3. Set the desired log interval.
4. Click on the <Apply> button (Fig. 33, Pos. 1) to adopt the setting.

A confirmation message is displayed.
5. Click on <OK> to restart the EVU.

The EVU restarts.
6.3.2 Data Logger
Note
The Data Logger submenu only appears if an SD card has been in-
stalled in the control unit.
To install the SD card, see chapt. 4.5.
In the Data Logger submenu, you have the option of setting the log and to export
or delete the measurement values (log data).
In the "Data Logger" submenu, it is possible to save the log data on an SD Card.
The data logger records the following measured values:

Date and time

Fill level (mould level)

Count rate

Temperature of the GAMMAcast detector(s)

Active calibration curve

System status
Note
The data log is saved in the main directory of the SD card in the form
of a .txt file.
If the tick (Fig. 34, Pos. 1) is not set at "active", no log data is saved
on the SD card.