manualshive.com logo in svg

Bernina dcet 2500, Инструкция по эксплуатации

Поделиться
Скачать
Bernina dcet 2500 Скачать руководство пользователя страница 64

64

Practical Sewing – Overlock

Sewing in the thread chain –
seam begin

· Sew to form a 3–4 cm (2") chain.
· Position fabric and sew one stitch.
· Insert needles (Needle stop down).
· Raise the presser foot.
· Pull the thread chain slightly and from the left, place it

under the presser foot (in the tape guide if you wanted).

· Lower presser foot.
· Start sewing, sewing over the thread chain.
· After approx. 2 cm /1", guide the thread chain towards the

knife to cut off the excess (see 1, 2).

▲

1

▼

3

▼

4

▼

5

▼

6

▲

2

Sewing in the thread chain –
seam end

· Sew to the end of the seam.
· Raise the needles (Needle stop down).
· Raise the presser foot.
· Remove work carefully towards the back.
· Turn work over and towards you and lay it under the presser

foot so that the needle enters the fabric with the first stitch.

· Lower the presser foot.
· Sew carefully over the previous stitching without cutting for

about 2–3 cm (1").

· Raise the tip of the foot and turn work away from you.
· Stitch off the edge (see 3, 4).

Securing thread chains

Leave a 12 cm / 5" chain at the beginning and at the end of
the seam so that it can be knotted or pulled through the
first/last few stitches with a darning needle (see 5).

Sewing curves

Overlocking outside and inside curves is easy. As the fabric 
is first cut and then sewn, it is important to watch the 
knives and not the needles. Guide the fabric as straight as
possible towards the knife. Avoid letting the fabric slip
between the knives and needles (see 6).

2500_DCE_2_englisch_neu  09.10.2007 15:01 Uhr  Seite 64

Содержание dcet 2500



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды