manualshive.com logo in svg

Bernina dcet 2500, Инструкция по эксплуатации

Поделиться
Скачать
Bernina dcet 2500 Скачать руководство пользователя страница 59

59

Converting from top & bottom cover stitch (position H) to cover/chain stitch position F (4 thread cover stitch)

Sewing with 5 thread (3-needle ) top & bottom cover stitch
has been completed. The presser foot is raised, the needle
threads are released, the material has been pulled away to
the left and threads cut.
You are now ready to convert back to cover/chain stitch
position F/G and the machine is still switched on «l».

1. Remove wiper thread.
2. Lift finger guard and wiper.
3. The needles are in their highest position.
4. Pull out wiper activating lever until it clicks into position.
5. Turn the stitch selection dial to the desired position

(F or G).

6. If position G selected, remove all needle(s) not in use

(only needle R is required).

7. If position F is selected, place a double layer of fabric under

the presser foot and needles.

8. Lower the presser foot. Turn the handwheel towards you

one or two revolutions, begin sewing.

2500_DCE_2_englisch_neu  09.10.2007 15:01 Uhr  Seite 59

Содержание dcet 2500



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды