manualshive.com logo in svg

Bernina dcet 2500, Инструкция по эксплуатации

Поделиться
Скачать
Bernina dcet 2500 Скачать руководство пользователя страница 58

58

Converting from cover stitch position F (4 thread cover stitch) to top & bottom cover stitch (position H)

Test sewing with 4 thread (3-needles) cover stitch has been
completed. The presser foot is raised, the needle threads are
released, the material has been pulled away to the left and
threads cut.
You are now ready to thread for the 5 thread top & bottom
cover stitch. The machine is still switched on «l».

1. Turn the stitch selection dial to «H».
2. Place a double layer of fabric under the needles and

presser foot.

3. Lower the presser foot.
4. Press the needle stop button so that the needles are in

their highest position.

5. Press wiper activating lever until it clicks into position.
6. Lower the wiper.
7. Press needle stop button to lower the needles.
8. Switch the power switch to off «O».
9. Bring the thread up from the spool and lay it from the

back to the front into the guide. 

10. Holding the thread in both hands, thread the first guide

located behind the machine head.

11. Take the thread through the groove indicated by arrows

on the cover (see diagram).

12. Bring the thread into the guide and eyelet, make sure

that the thread is in the tension discs by pulling it firmly
with both hands (see diagram).

13. Thread the eyelet of the feeding link (see diagram).
14. Raise the presser foot. Pull the thread over the wiper and

in front of the needles and then place it under the presser
foot (see diagram).

15. Lower the presser foot and the finger guard.
16. Turn the handwheel towards you one or two revolutions,

this will thread the wiper, turn the power switch to on
«l», begin sewing.

CAUTION:

Check to be sure the finger guard is in its lowest fixed
position.

2500_DCE_2_englisch_neu  09.10.2007 15:01 Uhr  Seite 58

Содержание dcet 2500



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды