manualshive.com logo in svg

Bernina dcet 2500, Инструкция по эксплуатации

Поделиться
Скачать
Bernina dcet 2500 Скачать руководство пользователя страница 51

Cover stitch sewing test and fine tuning

51

Cover stitch sewing test and
fine tuning

After threading, check that the stitch selection dial is on your
desired position for F. Test sew.

Starting to sew:

Raise the presser foot and place a double layer of fabric
under the presser foot and needles. Lower the presser foot.
To make the first stitch, turn the handwheel towards you to
check the position of the needles. Sew. When sewing is
interrupted, the needles stop in the fabric.

When sewing is complete, raise the needles by turning the
handwheel away from you (clockwise). This releases the
needle threads from the lower looper. Do not use the needle
stop button! Raise the presser foot and remove work towards
the left. Cut threads (thread cutter).

Fine tuning top & bottom cover
stitch

Compare your result with the stitch formation on the
threading diagram in the looper cover.

The needle threads form two or three straight lines on the
upperside of the fabric.
They appear as dots on the underside of the fabric.

The wiper thread forms horizontal loops between the two or
three needle threads on the upper side of the fabric.

The looper thread forms horizontal and vertical loops
between the two or three rows of needle threads on the 
underside of the fabric to give a stretchy, durable seam.

Incorrect stitch formation can be corrected by fine tuning.

To increase the tension push the fine tuning lever up.
To reduce the tension push the fine tuning lever down.

A Fine tuning for the needle 

L

thread (yellow)

B Fine tuning for the needle 

C

thread (green)

C Fine tuning for the needle 

R

thread (brown)

D Fine tuning for the lower looper (purple)
E Fine tuning for the wiper thread (grey)

Fine tuning

If the needle threads form loops on the underside of
the fabric:

Increase the needle thread tensions.

Tip:

When using decorative threads, attach the deco guide
(see page 36) over the looper threading path. 
Do not thread the first machine guide but take the
thread directly through the deco guide.

Note:
If using needle system JLx2, reduce the needle thread
tensions slightly.

A

B

C

D

E

A

B

C

D

E

2500_DCE_2_englisch_neu  09.10.2007 15:00 Uhr  Seite 51

Содержание dcet 2500



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды