manualshive.com logo in svg

Bernina dcet 2500, Инструкция по эксплуатации

Поделиться
Скачать
Bernina dcet 2500 Скачать руководство пользователя страница 48

48

Threading 5-thread top & bottom cover stitch

Top & bottom cover stitch thread 

(grey markings)

Place the spool on the spool pin as illustrated.

Test sewing with 4 thread (3-needles) cover
stitch has been completed. The presser foot is
raised, the needle threads are released, the
material has been pulled away to the left and
threads cut.
You are now ready to thread for the 5 thread
top & bottom cover stitch. the machine is still
switched on «l».

1. Turn the stitch selection dial to «H».
2. Place a double layer of fabric under the

needles and presser foot.

3. Lower the presser foot.
4. Press the needle stop button so that the

needles are in their highest position.

5. Press wiper activating lever until it clicks

into position.

6. Lower the wiper.
7. Press needle stop button to lower the

needles.

8. Switch the power switch to off «O».
9. Bring the thread up from the spool and

lay it from the back to the front into the
guide. 

10. Holding the thread in both hands, thread

the first guide located behind the
machine head.

11. Take the thread through the groove

indicated by arrows on the cover (see
diagram).

12. Bring the thread into the guide and

eyelet, make sure that the thread is in the
tension discs by pulling it firmly with both
hands (see diagram).

13. Thread the eyelet of the feeding link (see

diagram).

14. Raise the presser foot. Pull the thread

over the wiper and in front of the needles
and then place it under the presser foot
(see diagram).

15. Lower the presser foot and the finger

guard.

16. Turn the handwheel towards you one or

two revolutions, this will thread the
wiper, turn the power switch to on «l»,
begin sewing.

CAUTION:

Check to be sure the finger guard is in its
lowest fixed position.

2500_DCE_2_englisch_neu  09.10.2007 15:00 Uhr  Seite 48

Содержание dcet 2500



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды