manualshive.com logo in svg

Bernina dcet 2500, Инструкция по эксплуатации

Поделиться
Скачать
Bernina dcet 2500 Скачать руководство пользователя страница 41

41

Cover/chain stitch functions and general operating instructions

Knife guard /cover and chain stitch extension plate

When the machine is converted to cover/chain stitch, the
knife guard in the looper cover is replaced by the cover stitch
extension plate. The extension plate covers the released
upper looper and extends the stitch plate to the right of the
presser foot.

To replace:

Open the looper cover. Remove the knife guard by pulling
gently to the left. To attach the extension plate, hold it at a
slight angle to the looper cover, position (1), hold both parts
parallel and push the plate to the right until it clicks into
place.

Note:
The looper cover will not close and the machine will not
sew when:
· the position of the conversion arm does not

correspond to the extension plate (cover/chain stitch)
or knife guard (overlock)

· the upper knife is not in the raised position when the

cover stitch extension plate is attached

· the selection lever is in roll hem position.

▲

▼

▲

▼

1

2500_DCE_2_englisch_neu  09.10.2007 14:59 Uhr  Seite 41

Содержание dcet 2500



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды