Bergen INTREPID GAS, Руководство пользователя, Страница: 51 / 151

Cut and install a piece of Tygon from the center fitting (clunk line) to the fwd
fitting on the carburetor. Cut another piece to connect the left side single fitting
to the rear fitting on the carb. This is a return line when pumping the bulb on the
carb. You can also use this as a Fill line from your Gas can.
On the third fitting, install a vent line that droops down to the landing gear.
Some suggest a longer hose that creates a loop to prevent fuel from dripping out
when doing continuous flipping maneuvers.
Secure all 3 hoses to the fittings on the tank with zip ties.