Bergen INTREPID GAS, Руководство пользователя, Страница: 148 / 151

Snap this end onto the tail servo wheel ball; making sure the ball is pointed
straight down with power on. Snap the loose push rod end onto the medium ball
on the tail pitch bellcrank. Mark the point on the carbon fiber rod where it needs
cutting so it fits into the push rod end assy. When measuring for this, make sure
the tail pitch bell crank is at 90 degrees and the tail pitch slider is centered on
the output shaft. Glue the second end onto the cut carbon fiber rod with JB
Weld, and let dry overnight.
Adjust the length of the pushrod ONLY to center the pitch slider on the output
shaft, between the gearbox and the tail rotor hub. Adjust the two plastic links so
the arm on the tail blade grip is straight out, centered on the setscrew hole in the
hub.