Beretta METEO GREEN HE R.S.I., Инструкция по установке и эксплуатации

Страница: 43 / 56

43
METEO GREEN HE R.S.I.
menu, displaying the new memorized settings.
HTG-PROG
(heating schedule)
Permits programming three 24 hours operating time bands.
Each time band is assigned a room
temperature set in USER menu (T-
ROOM DES 1, 2, 3).
To set the time bands, proceed as
follows:
- go to HTG-PROG
- press ENTER and the display will
?'[•^'@\†?}'[[[‡
- with the + e – buttons select one
of the available programs, described
below:
- Daily: you can schedule each day of
the week separately. The display will
show each day: Monday, Tuesday,
Wednesday, etc.
- Holiday: you can schedule week
days at the same time (Monday to
Friday) and Saturday and Sunday
differently
- Sat-Sun: you schedule only Satur-
day and Sunday
- Weekly : you can schedule all the
days of the week at the same time
(Monday to Sunday)
[]['\[@`][ '[&|^['??&•^>ƒ
™?^\}[[?&@ '[@<|]\†<]]\||[\^\<&•`^[ \}'[^'\'
\<&•`^[ƒ
The time bands programming phase always begins with a starting
timetable ( ON <@[&'<•[@<''[†>{?] \&@•&<[<'\&
ending timetable ( OFF <@[&'<•[@<''[†>{?] .
The 3 time bands are expressed on the display by the following
symbols:
1) ON OFF
2) ON OFF
3) ON OFF
Set the starting timetable ( ON ) by pressing the + and – buttons and
'[|^['??&•^>ƒ
[@<|]\†\||[\^\<&•`^[ƒ
Set the ending timetable (
OFF ) by pressing the + and – buttons
\&@'[|^['??&•^>ƒ
During the OFF phase, the boiler is in night operating mode
, and it will switch on only if the temperature falls under the
T-REDUCED value set (see USER menu, paragraph 3.2.4).
Once you set down the ending timetable, press ENTER.
[@<|]\†\||[\^\<&•`^[ƒ
Proceed the same way to set the subsequent time bands ,
of manual operating mode (see paragraph “operating mode”)
Desired temperature for the in case of heating
schedule (HTG-PROG), see paragraph “HTG-PROG”
- T-ROOM DES 2 (5°C-40°C °C): Desired temperature for the
second time band .
- T-ROOM DES 3(5°C-40°C):Desired temperature for the third
time band .
- T-REDUCED (5°C-40°C): Desired temperature for night opera-
ting mode and for PAUSE mode.
- RETURN: Permits returning to USER menu
To change the values set, follow the indications in the paragraph
“Adjusting the values set”
DISPLAYING
In displaying menu, you can run through the following values, which
refer to instantaneously recorded temperatures:
- T-OUTSIDE: Displaying the external temperature, only if an
external probe was connected to the boiler. By pressing EN-
TER, the display shows the maximum temperature value and
the hour when it has been recorded. By pr and – the
display shows the maximum and minimum values and the hour
when they have been recorded. By pressing ENTER, you return
to the DISPLAYING menu.
- T-ROOM: Displaying the room temperature [°C]. By pressing
ENTER, the display shows the room temperature set (T-ROOM
DES 1).
By pr and – the display shows the maximum and mini-
mum values and the hour when they have been recorded. By
pressing ENTER, you return to the T-ROOM menu.
- T-DHW (DO NOT USED): Displaying domestic hot water real-
time temperature [°C] .
By pressing ENTER, the display shows the current desired tem-
perature.
By pressing ENTER, you return to the T-DHW menu.
- T-BOILER: displaying the boiler delivery temperature (°C). By
pressing ENTER, the display shows the calculed temperature.
By pressing ENTER, you return to the T-BOILER menu.
œ<|]\†<&'[{?<][^`^^[&'?^‡<&[}•<[&†
[%].
- BURNER-TIME: Displaying the burner working hours. By pres-
sing ENTER, you cancel the memorized value.
By pressing ENTER you return to the BURNER-TIME menu.
- BURNER-START: Displaying the burner start-ups number.
By pressing ENTER, you cancel the memorized value.
By pressing ENTER, you return to the Information menu.
- WATER-PRESS: Displaying the boiler water pressure.
- RETURN: Permits returning to the DISPLAYING menu.
TIME+ DAY
In TIME+DAY menu, perform the fol-
lowing operations:
- Press ENTER.
The display shows the current hour and
the ”
“symbol.
- With + and – set the right hour.
By pressing conti or - the mi-
nutes elapse by 15 minutes stages: 15,
30, 45.
^['??&•^>ƒ
- The display shows the current day
and the corresponding number:
Monday
01
Tuesday 02
Wednesday 03
etc.
- With the + o – set the desired day
^['??&•^>ƒ
- The display returns to the TIME+DAY
A B
ENTER
+ -
ENTER
+
-
ENTER
+ -