Beretta METEO GREEN HE R.S.I., Инструкция по установке и эксплуатации

Страница: 41 / 56

41
METEO GREEN HE R.S.I.
HOLIDAY
To enable the function, you have to
set the system in winter mode and
overtake the 24 hours PAUSE in the
following way:
- in winter mode press the PAUSE
button.
The display shows four zeros in the
^??>'[>|[^\'`^[•[]@ƒ
-
press the PAUSE button repeteadly
to start setting the interruption hours.
Once the 24 hours are overtaken, the
PAUSE word will disappear from the
display
The displayshows HOLIDAY DUR
and thenumber of days of absence
(forexample 01).
If you do not make any setting,
after 3 sec. from displaying HO-
LIDAY DUR, the panel automatically
exits the programming
With the PAUSE button, you can increase the number of vacation
days.
With the AUTO/MAN button, you can decrease the number of va-
cation days.
To enable the function, wait 3 seconds, the panel memorizes
the data set. On the display appears “ ”.
The panel enters off mode.
The “HOLIDAY” function will enable right after the values are
set.
The function always disables at 24.00 of the last day schedu-
led.
If you want to disable the Holiday fun-
ction before it was scheduled to stop,
press the” ” button.
The “ ” symbol disables.
Select the desired operating mode
.
PAUSE
AUTO MAN
PAUSE
AUTO MAN
3.1.4 Unblocking function
Pressing simultaneously the buttons
You can reset the boiler after a safety
stop caused by a functioning fault.
During this function, the display
shows the word RESET and the “
“
—\<&†>{?]ƒ
After some moments, the word
RESET dissapears, the fault code
and the “
“, symbol appear again
for some seconds and then the boiler
starts to work normally.
If, after a safety stop, the boiler starts over to work normally,
the blocking is due to a casual situation.
If the blockings repeat, you should call the Service Center.
You can make up to 5 unblocking attempts in 15 minutes, after
that press the OFF/Reset button directly on the boiler.
For faults description, please refer to chapter 5 “Faults”.
PAUSE AUTO MAN
AUTO MAN
RESET
PAUSE
PAUSE
AUTO MAN
PAUSE
AUTO I MAN
+
RESET