Maintenance
40
Step 8. Restart the projector.
Do not turn the power on with the lamp cover removed.
Step 9. Resetting the lamp counter
Do not reset if the lamp is not replaced as this could cause damage.
i. Press and hold the Exit
5
button on the projector for 5
seconds to display the total used lamp time.
ii. Press Auto on the projector or on the remote control to
reset the lamp hour to “0”.
iii. Wait about 5 seconds to let the OSD disappear.
Temperature information
When the Temperature warning light is on, it is warning you of the following possible
problems:
1.
The internal temperature is too high.
2.
The fans are not working.
Turn the projector off and contact qualified service personnel for further help.
For more detailed information, please refer to
"Indicators" on page 40
.
Indicators
Illustration
•
Blank -
: Light OFF
•
O
: Orange light
•
: Light flashing
•
R
: Red light
•
: Light ON
•
G
: Green light
Light
Status & Description
Power Temp Lamp
Power events
-
-
(1) The projector needs 110 seconds to cool down as it was
abnormally shut down without the normal cooling down
process. Or
(2) The projector needs to cool for 110 seconds after the power
is turned off.
-
-
Stand-by mode.
-
-
The Power indicator light is flashing during powering up.
O
O
G
Содержание PB6240 - XGA DLP Projector
Страница 1: ...Welcome PB6240 Digital Projector Portable Series User s Manual...
Страница 6: ...Table of contents vi Memo...
Страница 53: ...Specifications 47 Dimensions Unit mm...
Страница 56: ...Regulation Statements 50 Memo...