BenQ PB6240 - XGA DLP Projector, Руководство пользователя

Страница: 33 / 56

Operation 27
Remote paging operations
You can operate your display software program (on a connected PC) which
responds to page up/down commands (like Microsoft PowerPoint) by
pressing
Page Up and Page Down on the remote control . See
"Connecting a computer" on page 16 for details.
Connect the projector to your PC or notebook with a USB cable prior to
using this function.
Freezing the image
Press the Freeze button on the remote control to freeze the image.
An icon
will display in the lower right corner of the screen. To
release the function, press the Freeze button on the remote control,
or the Source button on the projector control panel. Note that
pressing the Source button will also change the input source.
Even if an image is frozen on the screen, the pictures are running on
the video or other device. If the connected devices have active audio
output, you will still hear the audio even though the image is frozen.
Shutdown
1. Press Power and a prompt message
appears. Press Power a second time
to turn the projector off.
2. The Power indicator light flashes
orange and the lamp shuts down, the
fans continue to run for
approximately 110 seconds to cool
down the projector.
To protect the lamp, the projector will not
respond to any commands during the
cooling process.
3. Disconnect the power cord from the wall
socket.
• Do not unplug the power cord before the
projector shutdown sequence is complete or
during the 110-second cooling down process.
• If the projector is not properly shut down, to
protect the lamp, when you attempt to re-start
the projector, the fans will run for a few
minutes to cool down. Press Power again to
start the projector after the fans stop.