Positioning your projector
14
How to determine the position of the projector for a given
screen size:
1.
Select your screen size.
2.
Refer to the table and find the closest match to your screen size in the left columns
labelled 'Screen Diameter.' Using this value, look across this row to the right to find the
corresponding average distance from screen value in the column labelled 'Average'.
This is the projection distance.
3.
On that same row, look across to the right column and make note of the vertical Offset
value. This will determine the final vertical offset placement of the projector in
relation to the edge of the screen.
4.
The recommended position for the projector is aligned perpendicular to the
horizontal centre of the screen, at the distance from the screen determined in step 2
above, and offset by the value determined in step 3 above.
For example, if you are using a 120 inch screen, the average projection distance is 4450 mm
and with a vertical offset of 302 mm.
If you place the projector in a different position (to that recommended), you will have to tilt
it down or up to center the image on the screen after turning the projector on. In these
situations, some image distortion will occur. Use the Keystone function to correct the
distortion. See
"Correcting keystone" on page 25
for keystone correction.
How to determine the recommended screen size for a
given distance:
This method can be used for situations where you have purchased this projector and would
like to know what screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room.
1.
Measure the distance between the projector and where you want to position the
screen. This is the projection distance.
2.
Refer to the table and find the closest match to your measurement in the average
distance from screen column labelled 'Average'. Check that your measured distance is
between the min and max distances listed on either side of the average distance value.
3.
Using this value, look across that row to the left to find the corresponding screen
diameter listed in that row. That is the projected image size of the projector at that
projection distance.
4.
On that same row, look across to the right column and make note of the vertical Offset
value. This will determine the final placement of the screen in relation to the
horizontal plane of the projector.
For example, if your measured projection distance was 4.5m (4500mm), the closest match in
the Average column is 4450mm. Looking across this row shows that a 120 inches (10 feet or
3048mm) screen is required.
The projector can be adjusted (using the zoom control) to display on different screen sizes at
that projection distance. Be aware that these different screens have different vertical offset
values.
Содержание PB6240 - XGA DLP Projector
Страница 1: ...Welcome PB6240 Digital Projector Portable Series User s Manual...
Страница 6: ...Table of contents vi Memo...
Страница 53: ...Specifications 47 Dimensions Unit mm...
Страница 56: ...Regulation Statements 50 Memo...
