BenQ PB6240 - XGA DLP Projector, Руководство пользователя

Страница: 45 / 56

Maintenance 39
• This lamp contains mercury. Consult your local hazardous waste regulations to dispose
of this lamp in a proper manner.
Step 1. Turn the power off and disconnect the projector from the wall socket.
Step 2. Turn the projector over. Then loosen the
screws and remove the lamp cover. If the
lamp is hot, avoid burns by waiting for 45
minutes until the lamp has cooled.
Step 3. Slide the latch to release the lamp as shown
in the picture.
Step 4. Loosen the screw that holds the lamp to the
projector. If the screw is not loosened
completely, they could injure your fingers.
It is strongly recommended that you use a
magnetic-head screwdriver.
Step 5. Lift the handle so that it stands up. Use the
handle to slowly pull the lamp out of the
projector.
• Pulling it too quickly may cause the lamp to
break and scatter broken glass in the
projector.
• Do not place the lamp in locations where
water might splash on it, children can reach it,
or near flammable materials.
• Do not insert your hands into the projector after the lamp is removed. If you touch the
optical components inside, it could cause color unevenness and distortion of the
projected images.
Step 6. Insert a new lamp. Make sure the handle is
fully locked, move the latch back, and
tighten the screw firmly.
• Loose screw may cause a bad connection,
which could result in malfunction.
• Do not over tighten the screw.
Step 7. Re-install the lamp cover and tighten the
screw. Do not turn the power on with the
lamp cover removed.