63
User selectable DVD Recorder preferences
Eng
lish
In cases like this, the DVD Recorder can be set to read the disk and output component video in
’Progressive Scan’ mode. To do so, you need to select
’Progressive Scan’ for ’Video output’.
1 Select the ’
Video Output
’ item from the ’Setup’ menu, and then press the
Right
button.
2 Press the
Up
or
Down
button to select ’
Interlace
’ and ’
Progressive
’.
3 Press the
OK
button to confirm.
Notes:
’Progressive scan’ is only applicable for NTSC format discs and only when being displayed on a display
device which has independent component video progressive scan inputs. PAL format discs will not
display properly using the ’Progressive scan’ setting for ’Video output’ on the DVD Recorder.
If your display device has independent component inputs, they may not switch inputs automatically. In
this case, you must select the appropriate input on the device yourself to view the video.
Tip:
When playing a DVD disc, you can press the P-SCAN
button to instantly toggle DVD Recorder
video output between progressive and interlaced scan modes.
Audio Setup
If digital audio equipment is connected to the digital output terminal on the rear panel of the
DVD Recorder, you can select the appropriate setting in this menu:
Note:
The settings in this menu only applies to digital audio output.
Dolby Digital:
Set the DVD Record to process Dolby Digital contents in PCM or Bitstream mode. It is
recommended that you select ’
Bitstream
’ mode when playing DVD movies that supports Dolby
Digital audio.
1 Select the ’
Dolby Digital
’ item from the ’Setup’ menu, and then press the
Right
button.
2 Press the
Up
or
Down
button to select ’
Bitstream
’ or ’
PCM
’.
3 Press the
OK
button to confirm.
DE325.book Page 63 Thursday, September 29, 2005 10:50 AM