40
Playing a disc
Eng
lish
Searching the disc by time
1. While playing a disc, press the
Display
button. The ’Display’ menu will display on-
screen.
2. Press the
Up
or
Down
button to highlight the
Search by time
icon.
3. Enter the time when the desired scene begins using the numbered buttons. For example, if
the desired scene begins approximately 1 hour, 20 minutes and 10 seconds after the disc
starts playing, enter ’0’, ’1’, ’2’, ’0’, ’1’, ’0’.
4. The disc will start playing from the time you entered.
Still picture
1. To pause disc playing or recording, press the
Pause/step
button on the remote
control.
2. To resume playing or recording a paused disc, press the
Play
button on the remote
control.
Repeat play
You can mark entire sections or the whole disc for repeated playback. Depending on the type of
disc (DVD video, DVD+RW, video CD) you can select a chapter, title or the entire disc.
1. Select the desired chapter, title or disc and start playing it.
2. While playing, press the
Repeat mode
button to select the following repeat modes (the
corresponding icon and word will display on-screen):
’
Chapter
’: Repeat a chapter (for DVD only)
’
Title
’: Repeat a track or a title
’
Off
’: no repeat
3. To switch off the repeat and resume normal playback, press the
Repeat mode
button
repeatedly until the repeat icon is displayed together with the word ’
Off
’.
Repeat a sequence (A-B)
You can repeat a certain sequence within a title or chapter.
1. While playing a disc, press the
A-B repeat
button at the position you wish to start the
repeat sequence. The icon ’
A
’ will display on-screen.
2. When you reach the position you wish to stop the repeat sequence, press the
A-B repeat
button again. The ’
A-B
’ icon will display on-screen. The sequence will start playing
repeatedly.
3. To stop repeat play, press the
A-B repeat
button until the repeat icon is displayed
together with the word ’
OFF
’.
Changing the camera angle
If a DVD contains video recorded from different angles, you can view the different angles
during playback.
1. While playing a disc, press the
Display
button. The ’Display’ menu will appear on-
screen.
2. Press the
Down
button to select the
Camera angle
icon.
If you are unable to select the Camera angle
icon:
The scene you selected was recorded with only one camera, and the camera angle function is
unavailable. Refer to your DVD cover for availability and details of multiple camera angles.
DE325.book Page 40 Thursday, September 29, 2005 10:50 AM