29
Initializing the DVD Recorder
Eng
lish
Press the
Right
button on the remote control to move the highlight bar to the ’
m (Minute)
’
item, and then press the numbered buttons to enter the minute, so enter a leading zero (0) for
the minutes 1 to 9.
Tip:
You can also use the
Up
or
Down
buttons to adjust the value.
For example:
To enter the time 4:15, press ’0’, ’4’, ’1’ and ’5’.
To enter the time 12:34, press ’1’, ’2’, ’3’ and ’4’.
How to save the settings
Press the
Right
button to move the highlight bar to ’
Save
’ and then press the
OK
button to store the time settings.
How to start using the DVD Recorder
To start using the DVD Recorder, either insert a DVD (see "Playing a disc" on page 32) or press
the
Input
button to select a suitable video input for viewing.
Manually searching for TV channels
You can make the DVD Recorder reset and replace its previously stored channel data with new
channel data by running the channel scan command.
CAUTION
This will erase all previously stored channel settings.
1. Press the
Setup
button on the remote control to launch the ’Setup’ menu.
2. Press the
Up
or
Down
button to select the
Video Setup
icon.
3. Press the
Right
button, and then press the
Up
or
Down
button to select
’
Channel Scan
’.
4. Press the
Right
button to highlight ’
Start
’, and then press the
OK
button to begin
channel searching. The DVD Recorder will store all channels that it finds. This may take
several minutes.
5. Press the
Setup
button to close the menu.
Adding/deleting TV channels
How to view a listing of stored TV channels:
1. Press the
Setup
button on the remote control to launch the ’Setup’ menu.
2. Press the
Up
or
Down
button to select the
Video Setup
icon.
3. Press the
Right
button, and then press the
Up
or
Down
button to select
’
Channel Setup
’. The channel list will display on the right side of the screen.
DE325.book Page 29 Thursday, September 29, 2005 10:50 AM
