62
User selectable DVD Recorder preferences
Eng
lish
Video Setup
TV Signal:
Select the TV signal input between TV or CATV.
Channel Scan:
Set the DVD Recorder to perform automatic channel scan and store found channels. Refer to
"Manually searching for TV channels" on page 29 for details.
Channel Setup:
Allows you to remove unwanted chanels from the DVD Recorder channel storage. Refer to
"Adding/deleting TV channels" on page 29 for details.
Screen Format:
You can adjust the video output for the playback of pre-recorded widescreen movies to suit
your display screen shape.
Note:
This option will only have effect with pre-recorded movies which were recorded in a widescreen mode.
1 Select the ’
Screen Format
’ item from the ’Setup’ menu, and then press the
Right
button.
2 Press the
Up
or
Down
button to select a screen format:
4:3 Letter Box
- full screen.for viewing 4:3 aspect ratio movies on a 4:3 aspect ratio screen
4:3 Pan Scan
- full screen for viewing a 16:9 aspect ratio movie in full height on a 4:3 aspect ratio
screen. This scales the whole picture to a larger size until the 4:3 screen height is reached,
then crops the left and right edges to the width of the 4:3 screen.
16:9 Wide
- for viewing a 16:9 ratio movie on a 16:9 ratio screen. Has no effect on a 4:3 ratio screen.
3 Press the
OK
button to confirm.
Video Output:
You may have a pre-recorded DVD in NTSC format, and a display device (TV or projector)
which has component NTSC (progressive scan) input terminals.
DE325.book Page 62 Thursday, September 29, 2005 10:50 AM
