Bennett CNG Spec.100 Series Operators Manual
Diagnostics
43
0.4 619 SOFTWARE I.D. NUMBER
This software id number identifies the 619 software revision level. The PPM display shows the dispenser is in Diagnostics Level 0.4.
1.
If
Enter
was pressed in the previous level, the next level of Diagnostic Code 0 is
displayed.
2.
The current level of the 619 software revision will be displayed as shown in
Figure
5.4.
Note:
This will change from software version to software version.
3.
Press [
ENTER
] to move from one level to another of Diagnostics Code 0.
4.
Press the [
CANCEL
] button to exit this code.
5.
Press the [
CANCEL
] button twice to exit Diagnostics.
DIAGNOSTIC’S CODE 1 – DISPLAY SEGMENT TE ST
The display segment test is used to identify failed segments in the main displays or the individual price per mass (PPM) displays.
1.
To enter the display segment test. Press the
1
button on the keypad and the
Enter
button.
The main sales display window will say,
PRESS ENTER
as shown in
Figure 5.5
.
Press the [
ENTER
] button to begin.
The main display and the individual PPM displays begin to display all dashes as
shown in
Figure 5.6
.
2.
Each time the
Enter
button is selected a new set of segments will be displayed. The
displays will flash until the
Cancel
button is pushed to exit this code.
3.
Press the [
CANCEL
] button to exit this code.
4.
Press the [
CANCEL
] button twice to exit Diagnostics.
DIAGNOSTIC’S CODE 2 – ERROR HISTORY
The error log file displays the last 10 errors for each selected side that are included in the error log file. The errors are displayed for the
selected side. If the latest 10 errors were all on side 1, then no errors would be displayed on side 1, and 10 errors would be displayed on
side 2. Refer to
Figure 5.7
.
1.
Enter diagnostics and press the
2
button on the keypad and the [
ENTER
] button.
2.
Press the [
ENTER
] button to view the data in descending chronological order.
3.
Press the [
CANCEL
] button to exit this code.
4.
Press the [
CANCEL
] button twice to exit Diagnostics.
FIGURE 5.4 – 619 SOFTWARE ID
Sale $
619 id
GGE
01.00.031
Diag
--0.4
FIGURE 5.5 – DISPLAY SEGMENT
Sale $
press
GGE
enter
----
----
Sale $
------------
GGE
-------
----
----
FIGURE 5.6 – DASH DISPLAY SEGMENT
FIGURE 5.7 – ERROR HISTORY
Sale $
Error log
GGE
No err
Diag
---2
Содержание CNG Spec. 100 Series
