Dosing pumps
Present
Flow switch
ZWMX2155
Level detection acid and chlorine container
Flow monitoring with notification on electrolyzer,
no flow monitoring on acid addition.
Power supply
Optional
Housing
230V ~, 50 Hz
Installation
IP65 IK07 Rohs
Dimensions
Wall mounting with screws and dowels
Weight
50x95 cm
Installation
Installation Items
The factory provides the slab with water treatment equipment without a plug for the dosing
devices. This unit is electrically connected to the salt electrolysis unit.
Attention!
○ The electrical installation must be carried out in such a way that:
- The electrolysis and acid pump cannot operate if the filter pump is not working. This can be
done by adding a flow switch/flow controller ZWMX3552-P to the installation or by
using the same power line as the filter pump.
- The salt electrolysis and acid pump can be switched off when the filter pump is running.
- Switching off is done by setting the intensity control knob to 00.
○ Adding chemicals for the pool should be done downstream from the pool accessories such
as heater, UV lamp, filter, etc.
○ It is recommended to set the installation of the water treatment unit in bypass
configuration.