Additional : operation and maintenance of the chlorinator
1. The mixture and maintenance of water and salt The operational state and maintenance of
the salt chlorinator
1.1 The calculation of the amount of water:
Knowing the volume of the pool is the first step in adding salt to the pool .
Rectangular pool: length (meter) x width (meter) x average depth (meter) = pool water
capacity ( cubic meters)
Round pool: diameter (meter) x diameter (meter) x average depth (meter) x 0.785 = pool
water capacity (cubic meters)
Oval pool: length (meter) x width (meter) x average depth (meter) x 0.893= pool water
capacity (cubic meters)
1.2 Salt Type
The salt used must be "pool salt". The sodium chloride (NaCl) in the salt must be at least
99.6%, and have a biocide approval number.
1.3 Adding the right amount of salt:
Most pools contain a certain amount of salt, the concentration of salt in the water depends
greatly on the water source. Users can use a portable NaCl tester or a salinity pen to test the
current salt concentration of the pool.
TIPS
The normal salt concentration level for the salt chlorinator is 2000-2500 ppm (2-2.5 kg of
salt per cubic meter of water)
When you first start using the electrolyzer, add salt to the pool according to the steps
below:
A) Use a salt content meter to check the initial salt concentration in the pool.
B) Add the correct amount of salt, making sure to add 2-2.5 kg of salt for each cubic meter
of the pool.
Model
Chlorine
production
Ideal business location
ZPTX0010-P
10g/h
unit suitable for swimming pools = 30 m³
ZPTX0018-P
18g/h
unit suitable for swimming pools = 50 m³
ZPTX0030-P
30 g/h
unit suitable for swimming pools = 90 m³
